High-Resolution Micro-Translation Stages with Ballscrew Drive

The PI Product / Information You were Looking for
was moved to a new location

 

Click Here for new Address of

High-Resolution Micro-Translation Stages with Ballscrew Drive

 

The product You were Looking for was moved Click Here for new Address M-110.2 M-111.2 M-112.2 High-Resolution Micro-Translation Stages with Ballscrew Drive 5 to 25 mm Travel Ranges 5000 h MTBF Very Cost Effective 200 nm Minimum Inc. Motion Hall-Effect Limit & Reference Switches Recirculating Ballscrew M-110, M-111 and M-112 are high-resolution motorized translation stages providing linear motion of 5 mm, 15 mm and 25 mm. Small Size, High Performance A major appeal of these stages is their small form factor in which they feature precision linear ball bearings for flatness and straightness of <0.5 microns over 15 mm. A miniature DC or stepper motor drives the platform via a backlash-compensated ballscrew system and gearhead. To meet the most critical positioning demands, the DC motor is equipped with a high-resolution encoder featuring resolution of 8.5 nm per count. The combination of the extremely low stiction/friction design and high-resolution encoder allows minimum incremental motion of 0.2 µm and speeds to 2 mm/sec. 24 Hours a Day - 7 Days a Week: 24/7 Duty Cycles To meet industrial demands, the M-110.2, M-111.2 and M-112.2 linear translation stages are equipped with a recirculating ballscrew instead of a leadscrew for precise motion with reduced friction. This allows 24/7 duty cycles. To protect your investment, integrated non-contact Hall-effect limit and reference switches with direction sensing are standard. The connector on the DC-servo versions features integrated line drivers for cable lengths up to 10 meters between actuator and controller. Low Cost of Ownership As mentioned before, these compact PI stages are extremely cost effective in industrial applications. The combination of the M-11x.2DG and the networkable C-862 Mercury™ single channel servo controller/ driver offers high performance for a very competitive price in both single and multi-axis configurations. Micromachining Photonics packaging automation Fiber optic instrumentation Fiber alignment Quality control Test equipment M-112.2DG, M-111.2DG, M-110.2DG (from front to back) providing 25 mm, 15 mm and 5 mm travel range M-110, M-111, M-112 dimensions in mm

Technical Data

Models	M-110.2DG	M-111.2DG	M-112.2DG	M-110.22S	M-111.22S	M-112.22S	Units
Travel range	5	15	25	5	15	25	mm
Design resolution	0.0085	0.0085	0.0085	0.014	0.014	0.014	µm
Min. incremental motion	0.2	0.2	0.2	0.2	0.2	0.2	µm
Unidirectional repeatability	0.5	0.5	0.5	0.5	0.5	0.5	µm
Backlash	<1.0	<1.0	<1.0	<1.0	<1.0	<1.0	µm
Max. velocity	1.5	2.0	2.0	1.0	1.0	1.0	mm/sec
Max. normal load capacity	5	5	3	5	5	3	kg
Max. push/pull force	10	10	10	10	10	10	N
Max. lateral force	10	10	10	10	10	10	N
Encoder resolution	2048	2048	2048	-	-	-	counts/rev.
Motor resolution	-	-	-	1200*	1200*	1200*	steps/rev
Drivescrew pitch	0.5	0.5	0.5	0.5	0.5	0.5	mm/rev.
Gear ratio	28.44444:1	28.44444:1	28.44444:1	28.44444:1	28.44444:1	28.44444:1
Nominal motor power	0.6	2	2	*	*	*	W
Motor voltage range	0 to ±12	0 to ±12	0 to ±12	24*	24*	24*	V
Weight	0.3	0.4	0.5	0.3	0.4	0.5	kg
Cable length	500	500	500	500	500	500	mm + 3 m extension cable
Connector	15-pin sub-D m	15-pin sub-D m	15-pin sub-D m	15-pin sub-D m	15-pin sub-D m	15-pin sub-D m
Recommended motor controllers	C-843, C-848, C-862	C-843, C-848, C-862	C-843, C-848, C-862	C-600, C-630	C-600, C-630	C-600, C-630
*2-phase stepper, 24 V chopper voltage, max. 250 mA / phase, 1,200 microsteps with C-600, C-630 controllers

To request a quote click here and copy and paste the ordering information in the proper fields at the bottom of the quote-request form.

M-110.2DG
Micro-Translation Stage, 5 mm, Closed-Loop DC Motor, Ballscrew

M-111.2DG
Micro-Translation Stage, 15 mm, Closed-Loop DC Motor, Ballscrew

M-112.2DG
Micro-Translation Stage, 25 mm, Closed-Loop DC Motor, Ballscrew

M-110.22S
Micro-Translation Stage, 5 mm, Stepper Motor, Ballscrew

M-111.22S
Micro-Translation Stage, 15 mm, Stepper Motor, Ballscrew

M-112.22S
Micro-Translation Stage, 25 mm, Stepper Motor, Ballscrew

Adaptors and Angle Brackets Same as for Leadscrew Versions M-110.1/M-111.1/M-112.1.

Custom Designs for Volume Buyers