LVPZT Amplifiers for Multilayer Bender Actuators

The PI Product / Information You were Looking for
was moved to a new location

 

Click Here for new Address of

LVPZT Amplifiers for Multilayer Bender Actuators

 

The product You were Looking for was moved Click Here for new Address E-650 LVPZT Amplifiers for Multilayer Bender Actuators Specifically Designed to Drive Multilayer "Bimorph" Actuators Bench-Top and OEM Versions Up to 18 W Peak Power LCD Voltage Display Output Voltage Range 0 to 60 V and Separate Fixed Voltage E-650.00 is a bench-top piezo driver, especially designed for low-voltage, multilayer PZT bender actuators ("bimorphs") such as the PL122 to PL140. It is equipped with a special circuit that can provide one fixed voltage and a variable voltage in the range of 0 to 60 V. The driver can output and sink a peak current of 300 mA. The E-650.00 can be operated in two ways: I. Manual operation: Output voltage can be set by a 10-turn DC-offset potentiometer in the range of 0 to 60 V. II. External operation: Output voltage is controlled by an analog signal applied to the BNC input, ranging from 0 to 10 V. Multiplying by the gain factor of 6, an output voltage range of 0 to 60 V results. The DC-offset potentiometer can be used to bias the control input voltage. A 3½-digit LCD display shows the output voltage. The E-650.OE is the OEM version of the E-650.00. It provides peak output power of 8W. All inputs and outputs are via 8 header pins located on the bottom of the module. The E-650.OE is designed to be mounted on a circuit board. The electronics are fully enclosed in a metal case. E-650.00 LVPZT Amplifier for Multilayer Bender Actuators E-650.OE LVPZT Amplifier Module for Multilayer Bender Actuators, OEM Version

Technical Data

Models	E-650.00	E-650.OE
Function	Power amplifier	Power amplifier
Channels	1	1
Maximum output power	18 W	8 W
Average output power	6 W	4 W
Peak output current 5 ms	100 mA	60 mA
Current limitation	Short-circuit proof	Short-circuit proof
Voltage gain	6 ±0.1	6 ±0.1
Polarity	positive	positive
Control input voltage	0 to +10 V	0 to +10 V
Display	3½ digit LCD	-
Output voltage	0 to 60 V, one additional fixed voltage of 60 V	0 to 60 V, one additional fixed voltage of 60 V
DC-offset setting	0 to 60 V at output, with 10-turn pot (E-650.00 only)	0 to 60 V at output, with 10-turn pot (E-650.00 only)
Input impedance	100 kW	100 kW
Frequency response	600 Hz @ 1000 nF load, 6 kHz @ no load	200 Hz @ 1000 nF load, 3 kHz no load
Control input socket	BNC	header pins
PZT voltage output socket	9-pin Sub-D	header pins
Dimensions	160 x 125 x 50 mm	70 x 42 x 30 mm
Weight	0.7 kg (w/o P/S)	0.15 kg
Operating voltage	90-240 VAC, 50-60 Hz, (external switching P/S, included)	+/- 15 V, 315 mA max., stabilized
Operating temperature range	0 to +50°C	0 to +50°C

To request a quote click here and copy and paste the ordering information in the proper fields at the bottom of the quote-request form.

E-650.00
LVPZT Amplifier for Multilayer
Bender Actuators, Bench-Top

E-650.OE
LVPZT Amplifier Module for
Multilayer Bender Actuators,
OEM Version

Custom Designs
for Volume Buyers