HVPZT Amplifier, 3 Channels

The PI Product / Information You were Looking for
was moved to a new location

 

Click Here for new Address of

HVPZT Amplifier, 3 Channels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 















PZT Actuators, Piezo Actuator Precision Piezoelectric Flexure NanoPositioning Stage Fast Steering Mirror, Piezo Active Optics/Steering Motors Tutorial: Piezo, Piezoelectrics in Positioning Capacitive Positions Sensor, Capacitance Sensor Ultra Precision Motion Control: Piezo Driver, Control Electronics MicroPositioning Stage, / Hexapod Systems Photonics Packaging Systems Precision Motion Control, Motor Controller Index Products Overview

Go to Homepage


The product You were Looking for was moved

Click Here for new Address

E-463
HVPZT Amplifier, 3 Channels
  • 3 Independent Channels
  • 3 x 5 W Peak Power
  • 3 LED Voltage Displays
  • Output Voltage Range 0 to -1500 V





The E-463.00 is a bench-top amplifier for high-voltage PZTs. It contains three independent amplifiers that can output and sink a peak current of 4 mA and an average current of 3 mA each. The E-463.00 can be operated in two ways:

I. Manual operation:
Output voltage for each channel can be set by a 10-turn DC-offset potentiometer in the range of 0 to -1000 V.

II. External operation:
Output voltage is controlled by an analog signal applied to the BNC inputs, ranging from 0 to 10 V. Multiplying by the gain factor of -150, an output voltage range of 0 to -1500 V results. The DC-offset potentiometer adds a DC bias to the input, allowing continuous shifting of the input range between 0 V to +10 V and -6.66 V to 3.33 V (see link).

Three 3½-digit LED displays show the output voltage of each individual channel. For frequency response with selected HVPZTs, see graph below.

For computer-controlled closed-loop positioning electronics, refer to the E-500 system starting see link.
E-463.00

E-463.00


E-463, frequency response with various PZT loads. Values shown are capacitance in nF, measured in actual PZT.

E-463, frequency response with various PZT loads. Values shown are capacitance in nF, measured in actual PZT.


Technical Data
ModelsE-463.00

FunctionPower amplifier

Channels3

Maximum output power5 W per channel (see link)

Peak output current 5 ms3 mA per channel

Current limitationShort-circuit proof

Voltage gain-150 ±1

PolarityNegative

Control input voltage0 to +10 V

Output voltage0 to -1500 V

DC-offset setting with 10-turn pot.0 to -1000 V at output

Input impedance1 MW

Display3 x ½ digits, LED

Control input sockets3 x BNC

PZT voltage output sockets3 x LEMO ERA.0A.250.CTL

Dimensions235 x 103 x 288 mm (see link)

Weight4.3 kg

Operating voltage90-120 / 220-240 VAC, 50-60 Hz (linear P/S)




To request a quote click here and copy and paste the ordering information in the proper fields at the bottom of the quote-request form.

E-463.00
HVPZT Amplifier, 3 Channels,
Bench-Top

Custom Designs
for Volume Buyers

Piezo Nano-Actuators · Low Inertia Hexapod Piezo · Piezoelectric Material · Capacitance Sensors · Ultra-Precision Motion Control, Flexure Nano-Positioning Stage · Precision Nanopositioner · Parallel Kinematic · · Micropositioners · PI Ceramic Piezoceramic Material Nanoautomation · PI-USA · Nanopositioning-Systems PDF Catalog · Hexapod · Micropositioning · Hexapod PIFOC® Piezo Microscopy Focus Scanner · Ultrasonic Piezo Motors, Piezomotor · Multilayer Piezo Lifetime · Piezo Systems, Piezo Actuator